Ecowind
REDUCES GAS COMSUMPTION
OPTIMIZE RADIATORS PERFORMANCE
SPREAD HEAT AND SCENTS
START SAVING IN THREE STEPS
1
INSTALL ECOWIND
Installing ecowind is very simple, just place the appliance under the radiator and connect it to the electricity supply using the plug it is equipped with
2
SWITCH ON
Connect the temperature probe to the radiator. Ecowind will start to modulate the air speed based on the temperature read and will make the heat exchange more efficient.
3
SAVE
You can lower the temperature of the water in the boiler and start saving significantly without giving up the comfort of the perceived heat
THE BENEFITS OF THE ECOWIND SYSTEM
Improve your thermal performance by intervening directly on the final component of the system: your radiators.
EFFICIENCY
Ecowind doesn't just filter the air or distribute heat more quickly.
Speeding air flow on the surface of your radiators means increasing the heat exchange coefficient.
Its control unit automatically adapts the fan speed to extract heat in the most efficient way.
COMFORT
Air recirculation allows you to avoid stratifications of the temperature and make it more homogeneous.
The comfort perceived through Ecowind gives a feeling of well-being and comfort that cannot be had with other systems.
RISPARMIO
Ecowind is the only tool that allows you to lower the temperature of the radiators in the boiler and still perceive an increased sensation of heat.
Our goal
We are optimization designers.
The ECOWIND project was born with the aim of offering convenient and practical tools but with a high yield result.
The instrument does not require expert installers or masonry work. However, in laboratory tests it was possible to achieve savings of up to fifty percent on gas while sensing the same temperature. Ecowind is perfect for both the home and your shop and offers immediate results.
Radiators have a large exchange surface to try to make up for the lack of efficiency they have in transmitting heat.
For the same reason, they work better at higher temperatures than necessary.
In a classic system, to obtain 20°C in the room to be heated, it is often necessary to set a temperature of at least 70°C in the boiler that powers the radiators.
Ecowind intervenes on your radiators and transforms them into more efficient systems.
